Sierra Conveyors

Fully Integrated Conveyor Systems

Overview:

These conveyors are designed and built specifically for the REB-1 and REB-2. They are fully integrated with our balers and offer a total solution for your baling needs.

Photos (click image to view larger)

Model SC6-15-2.5 Conveyor

Specifications

Conveyor Style: S-style with 15’ Lower Horizontal, 21’0” Incline Section at 30°, 2’-6' Upper Horizontal with 5° nose down.
Belt Width: 72” Nominal (Between Skirts 69 1⁄2”)
Discharge Height: Approx. 10’- 4” Centerline of drive shaft to floor
Belting:
  • 9” Pitch, 1⁄4” Thick Precision Die Formed Hinge Pans
  • 9” Pitch, 4” High, 1⁄4” Thick Precision Formed Interlocking Side wings Welded To Hinge Pan
  • 1/4” x 2” Precision Die Formed Side bars
  • Solid bushings, hardened RC50-60 press fit into sidebars
  • 3” diameter single flange rollers
  • 3⁄4” diameter thru pin CR1045 Material, Ends Milled, Drilled for 1⁄4” Dia. Cotter Pin
  • .970 OD x .760 ID 1008 Tubing
  • Cotter pin locking style
  • Angle Cleats 1⁄4” x 3” x 4” on 72” centers
  • Impact Shoes 1” x 3” x 3” every 2nd pitch
Frame:
  • Open, structural steel construction, completely shop fitted and welded
  • 4” x 3” x 3/8” track with 1⁄4” wear strip Solid metal side covers
  • Inspection panels-bolted construction.
  • Electric/Gravity feed chain oiler
  • Side Skirts 36” high Incline and Upper Horizontal 12” High Pit Section
  • Load Impact Beams, 1 centered for 60” & 2 equally spaced for 72”
  • Adjustable Supports
Bearings & Drives:
  • 7 1⁄2 HP, 460 volt, 3 phase, Direct Coupled Motor Reducer w/brake
  • 3-7/16” Dia. Head Shaft and 2-15/16” Dia. Tail Shaft c1045, Machined alignment
  • 6 Tooth Sprocket, 9” Pitch, 18” Pitch Dia., Machined alignment
Speed: 40 feet per minute fixed
Live Load Capacity: 6,500 lbs
Guarding: Supplied in areas of personnel access up to 8’0”

Model SC5-15-7 Conveyor

Specifications

Conveyor Style: S-style with 15’ Lower Horizontal, 21’0” Incline Section at 30°, 7' Upper Horizontal with 5° nose down.
Belt Width: 60” Nominal (Between Skirts 57 1⁄2”)
Discharge Height: Approx. 10’- 4” Centerline of drive shaft to floor
Belting:
  • 9” Pitch, 1⁄4” Thick Precision Die Formed Hinge Pans
  • 9” Pitch, 4” High, 1⁄4” Thick Precision Formed Interlocking Side wings Welded To Hinge Pan
  • 1/4” x 2” Precision Die Formed Side bars
  • Solid bushings, hardened RC50-60 press fit into sidebars
  • 3” diameter single flange rollers
  • 3⁄4” diameter thru pin CR1045 Material, Ends Milled, Drilled for 1⁄4” Dia. Cotter Pin
  • .970 OD x .760 ID 1008 Tubing
  • Cotter pin locking style
  • Angle Cleats 1⁄4” x 3” x 4” on 72” centers
  • Impact Shoes 1” x 3” x 3” every 2nd pitch
Frame:
  • Open, structural steel construction, completely shop fitted and welded
  • 4” x 3” x 3/8” track with 1⁄4” wear strip Solid metal side covers
  • Inspection panels-bolted construction.
  • Electric/Gravity feed chain oiler
  • Side Skirts 36” high Incline and Upper Horizontal 12” High Pit Section
  • Load Impact Beams, 1 centered for 60” & 2 equally spaced for 72”
  • Adjustable Supports
Bearings & Drives:
  • 7 1⁄2 HP, 460 volt, 3 phase, Direct Coupled Motor Reducer w/brake
  • 3-7/16” Dia. Head Shaft and 2-15/16” Dia. Tail Shaft c1045, Machined alignment
  • 6 Tooth Sprocket, 9” Pitch, 18” Pitch Dia., Machined alignment
Speed: 40 feet per minute fixed
Live Load Capacity: 6,500 lbs
Guarding: Supplied in areas of personnel access up to 8’0”

*Sierra Reserves the right to change specifications without notice.

Sierra Safety: (Days without incident)

Sierra Recycling

Sierra Intl - CA

Sierra Demolition

Sierra Intl - GA